For full functionality of this site it is necessary to enable JavaScript.

TOA DKK MM-43X Multi-Function Water Quality Meter

-Measurement Method:

 +pH: Glass Electrode Method

 +ORP: Platinum Electrode

 +Ion: Ion Electrode Method

 +Conductivity: AC 2-Electrode Method

 +DO: Membrane Polarographic Method

 +Temperature: Thermistor Resistor

-Conductivity Measuring Frequency: 80Hz/3kHz automatic selection

-Electrode Inputs: 2ch (pH/ORP/Ion/DO Electrode/Conductivity cell connectable)

-Display Unit: Touch Panel Color Graphic LCD

-Display: Selectable 2-ch Simultaneous Display or Single Only Display

-Measurement Item/Range:

 +pH: pH 0.000 ~14.000

 +mV(ORP): -2000.0 ~ 2000.0 mV

 +Ion: Depends on the sensor

 +Conductivity: Depends on the cell

 +Resistivity: Conversion from conductivity Depend on the cell

 +Salinity: Conversion from conductivity

 +Concentration: Conversion from conductivity

 +TDS: Conversion from conductivity

 +DO: Depends on the electrode Saturation %

 +Temperature: 0.0 ~100.0℃; DO:0.0 ~ 50.0℃; Ion:Depends on the sensor (No temperature measurement function)

-Display Range:

 +pH: pH-2.000 ~16.000

 +mV (ORP): -2200.0 ~ 2200.0 mV

 +Ion (Manual/Auto range switching) (mol/L selectable): 

  ZOOM OFF:

  0.0 ~19.9μg/L

  20 ~199μg/L

  0.20 ~1.99mg/L

  2.0 ~19.9mg/L

  20 ~199mg/L

  0.20 ~1.99g/L

  2.0 ~19.9g/L

  20 ~199g/L

  200 ~1990g/L

  ZOOM ON:

  0.00 ~19.99μg/L

  20.0 ~199.9μg/L

  0.200 ~1.999mg/L

  2.00 ~19.99mg/L

  20.0 ~199.9mg/L

  0.200 ~1.999g/L

  2.00 ~19.99g/L

  20.0 ~199.9g/L

  200 ~1999g/L

 +Conductivity(Manual/Auto range switching)(Depends on the cell)

0.0 ~ 200.0μS/m (0.000 ~ 2.000μS/cm)

0.000 ~ 2.000mS/m (0.00 ~ 20.00μS/cm)

0.00 ~ 20.00mS/m (0.0 ~ 200.0μS/cm)

0.0 ~ 200.0mS/m (0.000 ~ 2.000mS/cm)

0.000 ~ 2.000S/m (0.00 ~ 20.00mS/cm)

0.00 ~ 20.00S/m (0.0 ~ 200.0mS/cm)

0.0 ~ 200.0S/m (0.000 ~ 2.000S/cm)

SI unit (S/m) and conventional unit (S/cm) selectable

 +Resistivity(Manual/Auto range switch)(Depends on the cell)

0.005 ~ 2.000 Ω・m (0.5 ~ 200.0Ω・cm)

0.00 ~ 20.00 Ω・m (0.000 ~ 2.000kΩ・cm)

00.0 ~ 200.0 Ω・m (0.00 ~ 20.00kΩ・cm)

0.000 ~ 2.000kΩ・m (0.0 ~ 200.0kΩ・cm)

0.00 ~ 20.00kΩ・m (0.000 ~ 2.000MΩ・cm)

00.0 ~ 200.0kΩ・m (0.00 ~ 20.00MΩ・cm)

0.000 ~ 2.000MΩ・m (0.0 ~ 200.0MΩ・cm)

0.00 ~ 20.00MΩ・m (0 ~ 2000MΩ・cm)

SI unit (Ω・m) and conventional unit (Ω・cm) selectable

 +Salinity: 

0.00 ~ 4.04% (NaCl)

0.00 ~ 42.40psu (PSS:Sea water salinity)

 +Concentration(Auto range switch):

0 ~ 2.000%

0 ~ 20.00%

0 ~ 200.0%

 +TDS(Manual/Auto range switch):

0 ~ 99.99mg/L

0 ~ 999.9mg/L

0 ~ 9.999g/L

0 ~ 99.99g/L

0 ~ 999.9g/L

+Dissolved Oxygen: 0.00 ~ 22.00mg/L (High range membrane set (Option) 0.00 ~55.0mg/L)

 +Saturation: % 0 ~ 220.0% (High range membrane set (Option) 0 ~ 550%)

 +Temperature: -5.0 ~110.0℃

-Display Resolution Switching:

 +pH:  0.01pH/0.001pH

 +mV (ORP): 1mV/0.1mV

 +Ion: 0.0μg/L~1990g/L (Maximum to 3 digits); 0.00μg/L~1999g/L (Maximum 4 digits)

-Repeatability(Main body unit):

 +pH: ±0.002pH

 +mV (ORP): ±0.2mV

 +Ion: ±0.5% FS

 +Conductivity: ±0.5% FS

 +Resistivity: ±0.5% FS

 +Salinity: ±0.5% FS

 +Concentration: ±0.5% FS

 +TDS: ±0.5% FS

 +Dissolved Oxygen:  ±0.03mg/L (Standard membrane); ±0.1mg/L (High range membrane)

 +Saturation: % ±1% (Standard membrane/High range membrane)

 +Temperature: within ±0.2℃

-Temperature compensation:

 +pH: Temp. compensation range: ATC (Auto Temperature Compensation): 0 ~100.0℃; MTC (Manual Temperature Compensation): 0 ~100.0℃

 +Conductivity: 

Temp. compensation range: ATC (Auto Temperature Compensation): 0 ~100.0℃; MTC (Manual Temperature Compensation): 0 ~100.0℃

N/A: ATC OFF

Standard Temp. setting: 0 ~100.0℃

Temperature Coefficient(Linear): 0 ~10.00%/℃

Temperature Coefficient(Multipoint): 2 ~10 points

Pure Water Dual Temperature Compensation: yes

 +Dissolved Oxygen: Temperature Compensation Range: ATC (Auto Temperature Compensation): 0~ 50.0℃;

-pH calibration: JIS pH Standard Solution, US Standard Solution, Custom Standard Solution, Max. 5-point Calibration

-Ion calibration: Max.5-point Calibration

-DO calibration: Auto Calibration (Zero Span Calibration)

-Temp. calibration: 1-point Calibration

-Conductivity Concentration Conversion Setting: 2-10 points

-DO Salinity Compensation Setting: yes

-DO ATM Pressure Compensation Setting: yes

-Performance Guaranteed Temperature, Humidity: 0 ~45℃ 85% or below (Condensation-free)

-Data Memory: 2000 data each channel

-Print Function: Optional External Printer EPS-P30

-Auto Hold Function: yes

-Auto Hold Conditions Setting: yes

-Statistical Calculation Function: Average Value

-Calibration History Creation Function: Max. 20 run lots

-Interval Measurement: yes

-Security Function: yes

-Upper/Lower Limit Output Setting: yes (1ch only)

-External Input/Output:

 +RS-232C Interface: yes (2ch)

 +USB (Host): yes

 +USB (Peripheral, Micro): yes

 +Analog Output:

pH:  ±700mV (pH0 ~ 14)

mV (ORP): ±1V (0 ~ ±2000mV)

Ion: 0 ~1VFS

Conductivity/Resistivity/Salinity/Concentration/TDS: 0 ~1VFS

DO/Saturation: 0 ~1VFS

Range(Ion/Conductivity/Resistivity/Salinity/Concentration/TDS): 100mV/Range

Temperature: 0 ~1V (0 ~100℃)

Alarm (1ch only): Upper Limit: Open Collector ; Lower Limit: Open Collector

-Option Connection:

 +External Printer: yes

 +Turntable (TTT510/710): yes

 +Electrode Selector(ES-1G): yes

 +Cell Selector (ES-1GC) : yes (Single option can be connected to ch-1)

 +Control Box (AC-1V): yes (For ch-1 only)

-Power Source: AC100 ~ 240V (AC Adapter)

-Power Consumption: Approx. 18VA

-Main Unit Dimensions(Excluding Protruding Parts): Approx. 130 W×60 H×230 D mm

-Main Unit Weight: Approx. 0.9kg

-Inluding:

+ Main unit

+ Sensor Holder: 7430850K

+ Sensor stand (Stand, strut, stopper): 7430860K

+ Tilt stand: 7430870K

+ Sensor attachment (G): 0IB00004

+ Sensor attachment (J): 0IB00005

+ Sensor attachment (DP): 0IB00007

+ Sensor attachment (ION): 0IB00006

+ AC adapter: 7430880K

+ Power cord: 118C229

+ Ground wire (2m): X0979500

+ Beakers (150mL): 0DE00001 (3pcs)

+ Manual

*Note*: Sensors are not included. Necessary ones will ve sold separately.

Details

-Tính năng:

+ Màn hình cảm ứng màu hiện đại

+ Mỗi kênh có thể được kết nối với các điện cực pH/ORP/Ion/DO/Độ dẫn điện

+ Có 2 cổng kết nối (chức năng nhận dạng tự động)

+ Tự động nhận dạng PC, bàn xoay, máy in

+ Thiết bị chuẩn USB

+ Chức năng bộ nhớ dữ liệu lớn(2.000 dữ liệu mỗi kênh)

Các hạng mục đo:

pH, ORP, độ dẫn điện, điện trở, độ mặn, ion, nhiệt độ, DO, bão hòa.

Ứng dụng: Thiết bị này dùng để đo pH, độ dẫn điện, điện trở, độ mặn, DO,TDS, nồng độ trong phòng thí nghiệm.


Datasheet


  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Apply your mail to get promotion information