GOTT GOTT-CTH-01 Concrete Test Hammer

DESCRIPTION

Spring impact energy 0.225 mkg. (2.207 Joule or Nm) Suitable for finished concrete structures and buildings having strength resistances from 10 to 70 N/sq.mm. This concrete test hammer entirely produced by GOTT, has aluminium frame and thanks to its very accurate manufacture processing and selected components ensures high precision test results in the time. The top quality test hammer available on the market. Supplied complete with calibration curve chart in N/mm² (Mpa) values, abrasive stone, carrying case.

ADDITIONAL ITEMS

ANVIL, USED FOR VERIFICATION OF CALIBRATION CONCRETE HAMMERS - CODE 300-339

Used for the verification of the calibration of the concrete test hammers. Special steel alloy made. Specification requires obligatory the use of the anvil for the hammer tests. The Standard specifies:

• Before a sequence of tests on a concrete surface, take and record readings using the steel reference anvil and check to ensure that they are within the range recommended by the manufacturer. If they are not, clean and/or adjust the hammer.

• After tests, take readings using the steel anvil, record them and compare them with those taken prior to the test. If the results differ, clean and/or adjust the hammer and repeat the test.