For full functionality of this site it is necessary to enable JavaScript.

Gigahertz-Optik P-9202-4 Signal Amplifier and Current Amplifier

-Power Supply: 

(16 - 24) VDC / 80mA 

Connector: Friwo Nb. 105316

-Current Input:

Connector: BNC Socket (Shield: -5V BIAS voltage or GND)

-Max. signal current: ± 5 mA

-max. Input Voltage: DC-Supply Voltage / 2

-Bias: ± 5 pA (@ 20°C)

-Bias: -5 V bias voltage at shield of Input BNC Socket (switchable to 0 VDC or -5 VDC). If -5 V BIAS voltage is used, the anode of the detector has to be connected to the shield and the cathode to the inner contact of the BNC Input connector.

-Output Voltage: 

Output voltage corresponding to the input current

Connector: BNC Socket

Max. Output Voltage: ± 9 V

Max. Output Current: ± 5 mA

If an oscilloscope is used to measure the output voltage, set the input impedance of the oscilloscope to 1MOhm.

-Current / Voltage gain ranges: 8

-Measurement range: 10 position rotary switch (OFF, REM, 8 Ranges)

-Interface: 

Optocoupler input for external gain switch

(5V / 25mA)

Connector: DSUB 9 pins, female

-Dimensions: 105 mm x 80 mm x 45 mm

-Weight: 500 g

-Temperature range: 

operation: (5 bis 40) °C

storage: (-10 bis 50) °C

-Humidity: <80%, non-condensing

Details

Datasheet

  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化

注册收新闻 - 获得优惠活动的机会