Manufacturer: Labstac - UK
Warranty: 12 months
Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
Pressure: 1.0-4.0 Kgf/cm²
Flow Procedure**: PF+AC+RO+DI+UF+TF
Ion rejection rate: 96%-99% (New RO membrane)
Organic rejection rate: >99%,when MW>200 Dalton
Particles and bacteria rejection rate: >99%
Bacteria: <0.1 cfu/ml
Output(25°C)****: 15 L/hrs
Pure water outlet: RO water and Ultrapure water
Water Quality Monitor: Portable TDS/conductivity test pen + on-line resistivity monitor
DimensionLxWxH: 410×220×420 mm
Weight: 20 kg
Standard configuration: Main body (Including 1 set of cartridges)+15 liters tank+ TDS pen +accessory bag
Power Consumption (W): 48 W
Power Supply: AC110-220 V, 50/60 Hz
Note: *The feed water quality will influence the pure water´s quality and cartridges´ life-span.
**PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange, UV:ultraviolet,
UF:ultrafiltration, TF:terminal microfiltration.
***Value of number will be influenced by temperature and feed water quality.
****All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.
Resistivity(25°C): 18.2 MΩ.cm
TOC***: <10 ppb
Endotoxin: <0.001 EU/ml
Heavy metal ion: <0.1 ppb
Flow rate: 2.0 L/min (with pressure tank)
RNases: <0.01 ng/ml
DNases: <4 pg/µl