Statico MTB2 S2556 监控系统的检测箱

Description

The Model MTB2 is a test device designed for periodical performance check of the S2555 Monitoring System. The Test

Box Size is 4” X 2.4” X 1” (100X60X25mm), with following buttons and connecting cables:

- “OPERATOR 1” round green button on the left side of the Top Panel

■ 21” long Operator cord, with Banana Plug end termination, on the back panel.

- “BENCH” square red button in the middle of Top Panel

■ 21” long Bench Cord, with Mono Plug end termination, on the back panel.

- “OPERATOR 1” round green button on the left side of the Top Panel

■ 21” long Operator cord, with Banana Plug end termination, on the back panel.

- “GROUND” in the center of the Front Panel

 ■ 21” long Ground cord, with Banana Plug and Alligator clip termination, on the

 front panel.