Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Range: Measuring range; resolution (at 23℃±5℃)
100mΩ: 0.00mΩ~150.00mΩ; 10μΩ
1000mΩ: 0.0mΩ~1500.0mΩ; 100μΩ
10Ω: 0.000Ω~15.000Ω; 1mΩ
100Ω: 0.00Ω~150.00Ω; 10mΩ
1000Ω: 0.0Ω~1500.0Ω; 100mΩ
10kΩ: 0.000kΩ~15.000kΩ; 1Ω
100kΩ: 0.00kΩ~150.00kΩ; 10Ω
1000kΩ: 0.0kΩ~1500.0kΩ; 100Ω
10MΩ: 0.000MΩ~15.000MΩ; 1kΩ
%: 5mΩ~10MΩ/±50.00%; 0.1%【5μΩ】
Measuring method: 4-terminal measurement with contact check.
Measuring time: 【Free running mode】2~10times/sec.
【Remote start mode】about 3.4msec/30msec.
Comparator setting range: Ω test mode: 0~15000[both for the upper and lower limit]
% test mode: 50.0% [LOW:0~-50.0%/ HI:0~+50.0%]
Indication comparator’s comparison result: LO/GO/HI, LED display and buzzer.
Control signal: input: START “L”[0V]→”H”[DC12V]⇒start
HOLD “L”[0V]⇒hold / open or ”H”[DC12V]⇒free run
output: LO/GO/HI, CONT-E and EOC/ open collector
Operation condition: 【Temp.】+5℃~+40℃、【Humidity】below 85%
Outer dimension: 260(W)×90(H)×250(D)mm【excluding protruding parts such as rubber legs, etc.】
Weight: about 2.0kg
Power supply: AC85V~265V、50~60Hz、about 20VA
Option:
- RS-232C/ GP-IB/ Printer output [Centronics] (Only one kind of interface can be provided with the checker)
- Pt Sensor
- Printer Cable
- Short termination (Zero ohm standard resistor)
