Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
REFERENCE CONDITIONS
Temperature: 23±5°C
Relative Humidity: 20 to 75%RH
Supply voltage:
230 V single-phase
400 V three-phase
Frequency of the measured signal: 50Hz
ELECTRICAL CHARACTERISTICS
Type 2 connector: 32A, 3PH+N+PE, type E-2201, 200/346V-240/415V
POWER SUPPLY
The CA 6652 is powered by the charging station being tested via the type 2 connector.
ENVIRONMENTAL CONDITIONS
For indoor use or outdoor use without rain.
Operating range: -20 to +55°C, 95%RH (from 0 to 40°C) without condensation
Storage: -20 to +70°C, 90%RH (from -10 to +40°C) without condensation
80%RH (from 40 to 60°C)
Pollution degree: 2
Altitude: <2,000m
CONSTRUCTION SPECIFICATIONS
Dimensions of the housing (L x W x H): 221 x 100 x 44mm
Dimensions of the type 2 connector approximately: 240 x Ø 58mm
Length of the cable: approximately 60cm
Weight approximately: 850g
Ingress protection:
IP40 per IEC 60529, in operation, with all terminals connected.
IP54 per IEC 60529, not in operation, with the type 2 plug protection cap in place.
COMPLIANCE WITH INTERNATIONAL STANDARDS
The instrument is compliant with standards IEC/EN 61010-2-030 and the leads are compliant with IEC/EN 61010-2-031: 300V
Category II, degree of pollution 2.
Instrument with double insulation .
ELECTROMAGNETIC COMPATIBILITY (CEM)
Emission and immunity in an industrial environment per IEC/EN 61326-1.15
