Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Output voltage: 0~15V
Output current: 0~3A
Stabilized Voltage status: Voltage stability：≤0.1%±3mV; Load stability：≤0.1%±3mA
Stabilized Current status: Current stability：≤0.1%±3mV Load stability：≤0.1%±3mA
Display accuracy : Voltage：0.5%±3readings Current：0.5%±3 readings
Ripple and noise: VPP≤1%
Display Resolution: Voltage：max 10mV; Current：Max 1mA; Power：Max 10mW
Display method: 4 digits red LED display, 0.40 inches
Power supply: AC 220V±10% /50Hz or AC 110V±10% /60Hz(if 110V, users need to talk to factory in advance)
Operation environment: Indoor，attitude：<=2000m，temperature：5~40℃，humidity：10~85%RH
Storage environment: Temperature：-20~80℃，humidity：<=80%RH
Dimension: 190mm* 70mm* 130mm （L*W*H）
Net weight 1.1kg
Fuse specification: 3A
Note: The above parameters are measured at the ambient temperature of 25±5℃, relative humidity <80%RH, and preheating for 30 minutes. Actual parameters may vary slightly.
Accessories:
Use manual × 1
Qualified certificate × 1
Power plug × 1
Communication:
Communication parameter:
Baud rate：9600
Start bit：1
Data bit：8
Calibration bit：/
Stop bit：1
Footer：0x0A(newline) or 0x0D0A(CRLF)
Cable connection: The product provides users with RS232 communication mode. The DB9 female connector has two TXD pins, three RXD pins, and five GND pins.
