Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Measurement Mode: PE, PETP, EE, EEV, CT, PECT
A-Scan Display: + Rectified, - Rectified, Full Waveform (RF)
Display Refresh Rate: 120 Hz
Measurement Rate:
+ 4 readings per second
+ 50 readings per second
+ 6 readings per second
Measuring Range
+ PE: 0.63 - 508mm
+ PETP: 0.63 - 508mm
+ EEV: 1.27 - 25.4mm
+ PECT: 0.63 - 508mm
+ PECT: 0.01 - 2.54mm
Calibration Options: Single, two point, velocity & material type
Measurement Accuracy: ± 1% or ±0.1mm
Measurement Resolution: 0.01 mm
Velocity Calibration Range: 1250 - 9,999m/s
B-Scan display speed: 15 seconds per screen
Datalogging: yes
Transducer Frequency Range: 1 - 10MHz
Display: 1/8 inch VGA
Battery Type: 3 x AA alkaline
Battery Life: 150 hours
Operating Temperature: -10 to 60ºC
Size (w x h x d): 63.5 x 165.0 x 31.5mm
Weight (including batteries): 383g
RS232 Interface: Bi-directional
Packing List: Elcometer NDT CG100ABDL+ gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable
Note: A transducer is not suppied with the Gauges, must be ordered separately
