Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Test voltage (dc): 250V, 500V, 1000V, 2500V, 5000V /+10 %
Range: 200 kΩ to 1 TΩ /5%
Bar graph range: 0 to 1 TΩ
Leakage current measurement: 1 nA to 2 mA /± 5 % + 2 nA
Capacitance measurement: 0.01 uF to 15.00 μF /15 % rdg + 0.03 μF
Timer: 0 to 99 minutes
Live circuit warning: 30 V to 660 V ac/dc /± 15 % + 2 V
Display: 75 mm x 105 mm
Power: 12 V lead-acid rechargeable battery, Yuasa NP2.8-12
Charger Input (AC): harger Input (AC) 85 V to 250 V ac 50/60 HZ 20 VA
Dimensions: 170 mm x 242 mm x 330 mm (6.7 in x 9.5 in x 13 in)
Weight: 3.6 kg (7.94 lb)
Enclosure sealing : IP40
Input overload protection: 1000 V ac
include: Set Test Cables with Alligator Clips (red, black, green), Infrared adapter with interface cable,FlukeView Forms Basic CD-ROM, AC Power Cord, English Manual, Users Manual on CD-ROM, Quick Reference Card, Software License Agreement, Registration Card, FlukeView Forms Installation Guide, USB-IR Cable Installation Guide, Set Ruggedized Alligator Clips
The tester’s accuracy is specified for one year after calibration at operating temperatures of 0 °C to 35 °C. For operating temperatures outside the range (-20 °C to 0 °C and 35 °C to 50 °C), add ± .25 % per °C, except on the 20 % bands add ± 1 % per °C.
Insulation resistance measurement |
||
|
Test voltage (dc) |
Range (dc) |
Accuracy (± reading) |
| 250 V | < 200 kΩ 200 kΩ to 5 GΩ 5 GΩ to 50 GΩ > 50 GΩ |
unspecified 5 % 20 % unspecified |
| 500 V | 200 kΩ 200 kΩ to 10 GΩ 10 GΩ to 100 GΩ > 100 GΩ |
unspecified 5 % 20 % unspecified |
| 1000 V | < 200 kΩ 200 kΩ to 20 GΩ 20 GΩ to 200 GΩ > 200 GΩ |
unspecified 5 % 20 % unspecified |
| 2500 V | < 200 kΩ 200 kΩ to 50 GΩ 50 GΩ to 500 GΩ > 500 GΩ |
unspecified 5 % 20 % unspecified |
| 5000 V | < 200 kΩ 200 kΩ to 100 GΩ 100 GΩ to 1 TΩ > 1 TΩ |
unspecified 5 % 20 % unspecified |
| 10000 V (1555 only) |
< 200 kΩ 200 kΩ to 200 GΩ 10 GΩ to 2 TΩ > 2 TΩ |
unspecified 5 % 20 % unspecified |
| Bar graph range | 0 to 1 TΩ | |
| Insulation test voltage accuracy | -0 %, +10 % at 1 mA load current | |
| Induced ac mains current rejection | 2 mA maximum | |
|
Charging rate for capacitive load |
5 seconds per μF |
|
|
Discharge rate for capacitive load |
1.5 s/μF |
|
|
Leakage current measurement |
Range: 1 nA to 2 mA |
Accuracy: ± (5 % + 2 nA) |
|
Capacitance measurement |
Range: 0.01 uF to 15.00 μF |
Accuracy: ± (15 % rdg + 0.03 μF) |
|
Timer |
Range: 0 to 99 minutes |
Resolution Accuracy: |
|
Live circuit warning |
Warning Range: |
Voltage Accuracy: |
General specifications |
|
| Display | 75 mm x 105 mm |
| Power | 12 V lead-acid rechargeable battery, Yuasa NP2.8-12 |
| Charger Input (AC) | Charger Input (AC) 85 V to 250 V ac 50/60 HZ 20 VA |
| This Class II (double insulated) instrument is supplied with a Class 1 (grounded) power cord. The protective earth terminal (ground pin) is not connected internally. The extra pin is for added plug retention only. | |
| Dimensions | 170 mm x 242 mm x 330 mm (6.7 in x 9.5 in x 13 in) |
| Weight | 3.6 kg (7.94 lb) |
| Temperature (operating) | -20 ºC to 50 ºC (-4 ºF to 122 ºF) |
| Temperature (storage) | -20 ºC to 65 ºC (-4 ºF to 149 ºF) |
| Humidity | 80 % to 31 ºC decreasing linearly to 50 % at 50 ºC |
| Altitude | 2000 m |
| Enclosure sealing | IP40 |
| Input overload protection | 1000 V ac |
| Electromagnetic compatibility | EN 61326 |
| Certifications |    |
| Safety compliance | CAT III 1000 V, CAT IV 600 V |
| Pollution degree | 2 |
