IP 65 control cabinet version with built-in 24 V= power pack, Ethernet crossover cable, screwdriver, installation instructions, manual and SMARTCONTROL manager on CD

Housing material: Steel sheet metal (Dimensions: 380 x 380 x 210 mm)

Protection: IP 65 (when correctly mounted)

Weight: 10 kg

Mains power: Built-in power pack (Input: 100 ... 240 V AC, 50/60 Hz; Output: 12 or 24 V DC)

Power consumption: < 2.5 W

Operating conditions: 5 ... 50 °C, no condensation

Interfaces: Ethernet, RS232, RS485

Memory capacity: 2 MB flash ring buffer (expandable with 4 GB microSD card)

Analog Inputs: 8 (A0 ... A7), 0...20 mA or 0...10 V (12 bit resolution)

Digital Inputs: 8 (IS0 ... IS7), active or passive (selectable via jumper JP2)

Temperature Inputs: 8 (T0 ... T7) for PT1000 sensors (2-wire connection)

Switching Outputs: 2 semiconductor relays (max. 40 V=/~, max. 1 A)

Analog Accuracy: typical ±0.05 V

Temperature Accuracy: Better than ±0.5° C

Digital Input Pulse Sequence: At least 10 ms / 10 ms (0/1)

RTC Battery: CR 2032 3 V (Replacement every 5 years)

Internal Data Buffer: 2 MB flash ring-buffer (Cyclical storage)

Datasheet