Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
-Power Supply: 230 VAC ±10%; 50/60 Hz; 20 VA
- Range:
+Free & Total Cl2: 0.00 to 5.00 mg/L (ppm)
+pH: 0.00 to 14.00 pH
+ ORP: 0 to 2000 mV
+Temperature: 5.0 to 75.0 °C (41 to 167 °F)
-Resolution:
+Free & Total Cl2: 0.01 mg/L (ppm)
+pH: 0.01 pH
+ ORP: 1mV
+Temperature: 0.1 °C
-Accuracy:
+Free & Total Cl2: ±8% or ±0.05 mg/L whichever is greater
+pH: ±0.05 pH
+ ORP: ±1 mV
+Temperature: ±0.5°C
-Min. Detectable Level: Free & Total Cl2: 0.05 mg/L (ppm)
-Input Impedance: 1012 Ohm
-Calibration:
+Free & Total Cl2: one point
+pH: one or two point or in line calibration
-Sampling Rate:
+Free & Total Cl2: adjustable from 3 to 90 minutes
+pH: adjustable from 3 to 120 seconds
-Dosage:
+Free & Total Cl2: proportional
+pH: ON/OFF or proportional, relay or 4-20mA output
-Delta:
+Free & Total Cl2: selectable from 0.1 to 5 mg/L (ppm)
+pH: selectable from 0.1 to 2 pH (hysteresis adjustable from 0.05 to 2 pH)
-Recorder Output: 4-20mA, 0-20mA
-PC Connectivity: RS485 port, galvanically isolated
-Baud Rate: 1200, 2400, 4800, 9600 bps
-Data Logging: up to 3500 data points
-Alarm Relay: SPDT contact with 5A, 230V resistive load
-Dosing Relay: SPDT contact with 5A, 230V resistive load
-System Error: SPDT contact with 5A, 230V resistive load
-Inlet Pressure: 0.07 to 4 bar with no external pressure regulator
-Sample Flow: 100 to 300 mL/min
-Sample Temperature: 5 to 40°C (41 to 104°F)
-Sample Inlet/Outlet Connection: 12mm male NPT fitting
-Drain Connection: 10mm barb
-Power Supply: 230 VAC ±10%; 50/60 Hz; 20 VA
-Enclosure: NEMA-4X standard, molded fiberglass polyester with transparent Lexan window
-Dimensions/Weight: 318 x 267 x 159 mm (12.5 x 10.5 x 6.25) / 5 kg (11 lb.) without reagents
-Each PCA 320-2 series model is supplied with reagent bottles (2), reagent caps (2), 1 DPD compound powder, tubing and instructions
