For full functionality of this site it is necessary to enable JavaScript.
EMIN.ASIA
0

How to hang feng shui paintings during Tet beautifully and straight without being visually unbalanced?

02/13/2026 13:39:27

At the end of the year, after the house has been cleaned, many families begin to think about replacing the paintings in their living room. Some choose gilded paintings of horses galloping to success to bring good luck at the beginning of the year. Others prefer traditional bronze paintings for their luxurious and cozy feel. Kindergartens often choose modern canvas paintings hung in sets for a harmonious look.

Measured with a tape measure, marked with a pencil, stepped back a few steps to observe, and then noticed it was slightly askew. Only after drilling and hanging it up did I realize it was a little too light. And at the beginning of the year, who would want a feng shui painting to be uneven.

The more valuable a painting depicting horses galloping to success, the more important it is to hang it correctly

Feng Shui horse paintings, especially those gilded or large-sized, are often quite heavy and valuable. Drilling in the wrong position not only damages the wall but also makes subsequent corrections more time-consuming and aesthetically unappealing.

Instead of estimating by eye, many families now use laser leveling devices to establish a horizontal line as a guide. Simply set the device in place, turn it on, and a light line will appear horizontally across the wall. The top edge of the painting is aligned with this line, resulting in a balanced appearance.

When you hang canvas paintings as a set, even small discrepancies become clearly visible

With sets of three or five paintings, uniformity between the frames is far more important than with single paintings. Just one frame being a few millimeters higher or lower will immediately make the overall look unbalanced.

Previously, many people had to measure every distance, mark numerous points on the wall, and then wipe them away for fear of ruining the aesthetics. With a laser level, only a fixed horizontal line is needed as a reference. The frames are placed at the same height, making the overall look much neater.

Tasks that used to be time-consuming become easier, especially when everyone is busy at the end of the year.

Reference: Quickly address wall moisture before hanging up pictures for Tet

Bronze paintings and large-scale artworks require consideration of both placement and focal point

For bronze or large-sized paintings, in addition to hanging them straight, they must be placed in the correct central position to harmonize with the sofa, coffee table, or the living room space.

If hung off-center, the entire room will feel unbalanced. These are small details, but they affect the overall feeling when entering the house.

Laser leveling devices like the Bosch GLL 3 ​​80, Leica Lino L2, or Stanley STHT 77516 8 are commonly used in interior decoration because of their simple operation and ease of use in home spaces. Simply turn on the device, follow the light path, and proceed step by step to achieve a neat and even wall finish.

Hanging paintings during Tet is also a way to show care and attention to the new year.

Vietnamese people always value neatness and order at the beginning of the year. A neatly hung painting in the center of the living room is not only aesthetically pleasing but also creates a sense of stability and tidiness when welcoming guests to offer New Year greetings.

Previously, hanging paintings relied heavily on intuition and estimation. But with the help of equipment, everything has become much simpler. Doing it right once ensures peace of mind throughout the year.

Therefore, hanging paintings during Tet is not just about decoration. It's also a way for each family to express their wishes for a more prosperous, successful, and stable new year through every small detail of their home.

Related News

Vietnam’s Semiconductor Industry Outlook to 2030: Opportunities and Challenges
11/10/2026 11:22:48

Những khoản đầu tư mới, cùng định hướng phát triển công nghiệp bán dẫn đến năm 2030, đang tạo nền tảng cho thị trường trong nước. Tuy nhiên, để nâng cao vị thế trong chuỗi giá trị toàn cầu, Việt Nam cần giải quyết bài toán về công nghệ lõi, nhân lực kỹ thuật và năng lực đo kiểm.

Choosing Fans, Heatsinks, Heat Spreaders, or Thermal Paste for High-Performance Electronic Devices
11/09/2026 13:50:49

SiC and GaN semiconductor components feature high power density and compact dimensions, causing heat to be concentrated within a very small chip area. The question of which thermal management solution is most widely used is often framed as a choice between four options: fans, heatsinks, thermal pads, or thermal grease. This framing requires some refinement, as these four components occupy different positions along the same heat-transfer path; in fact, most designs employ a combination of several of these elements. This article explains the role of each component, how to select thermal interface materials, and the impact of temperature on measurements.

EMIN GROUP AT VIMF BAC NINH 2026
11/07/2026 10:52:42

EMIN GROUP participated in the Vietnam Industrial & Manufacturing Fair 2026 (VIMF Bac Ninh 2026), held from November 4 to 6, 2025, at Kinh Bac Cultural Center in Bac Ninh City.

How Do Bidirectional DC Power Supplies Improve EV Testing?
11/07/2026 09:57:58

Bidirectional DC power supplies combine source and sink operation in one platform. This supports realistic EV battery cycling, regenerative energy handling, programmable test sequences, and flexible battery or charger emulation.

Stay Updated with Offers

Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.

By subscribing, you agree to our Terms of Service and Privacy Policy.

Quick Support

Direct access to our certified experts