Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Man-machine interface
- Display : Large high-contrast 3.5 ‘’ TFT colour screen - resolution 320 x 240
- Controls on front panel :18 direct-access buttons, 1 rotary button
- Adjustment of signal parameters :Continuous adjustment by the encoder and/or numeric keypad
- BNC output terminals on front panel :Generator outputs 1 & 2 - Separate adjustment (waveform, f, phase, amplitude, etc.), coupled or duplicated
- BNC I/O terminals on rear panel :TTL-compatible trigger and synchronization outputs
Continuous signal generation
- Signal types :Sine, Square, Triangle, Ramp, Pulse, White Noise, Arbitrary Signal (48 pre-installed waveforms)
Arbitrary signal generation
- Resolution / Sampling rate :14 bits / 125 MS/s
- Memory 16k memory depth (512k on CH1 only) - Storage of predefined or specific signals on USB key
- Editing of signals with SX-GENE : Acquisition, transfer & modification of a signal acquired from an oscilloscope (OX6000, OX7000, Scopein@Box). Graphical or mathematical editing with the SX-GENE software. Modification of a signal acquired and/or combination of standard signals from the generator
Signal frequency
- Frequency range :Sine from 0.001 mHz to 50.000 MHz,Triangle 300 kHz, Noise and Square 50 MHz, Pulse 20 MHz, Arbitrary Signals 5 MHz
- Resolution / accuracy: 7-digit display – resolution from 1 mHz to 1 kHz depending on frequency range ± 20 ppm for F > 10 kHz , ± 30 ppm for F < 10 kHz
- Long-term drift :± 100 ppm / year
- Temperature coefficient :< 5 ppm / °C
Amplitude
- Voltage levels: Output 1 = 2 mVpp ~ 10 Vpp 50 Ω 2 mVpp ~ 20 Vpp open circuit; Output 2 = 2 mVpp ~ 3 Vpp 50 Ω 2 mVpp ~ 6 Vpp open circuit
- Flatness < 0.1 dB for f < 100 kHz
- Vdc offset :Output 1 = ± 5 VDC at 50 Ω, Output 2 = 1,5 VDC at 50 Ω – accuracy < 5% ±1 mV
- Impedance / Protection :50 Ω / Protection contre les court-circuits
Signal characteristics
- AM Modulation
+ Carrier : Sine, Square, Triangle, Arbitrary (except DC)
+ Modulated signals :Sine, Square, Ramp, Noise, Arbitrary (2 mHz-20 kHz)
+ Depth :0% to 120%
- FM Modulation
+ Carrier : Sine, Square, Triangle, Arbitrary (except DC)
+ Modulated signals :Sine, Square, Ramp, Triangle, Noise, Arbitrary (2 mHz-20 kHz)
+ Frequency offset :0 to 12.5 MHz (GX1025) / 25 MHz (GX1050)
- FSK Modulation
+ Carrier :Sine, Square, Triangle, Arbitrary (except DC)
+ Modulated signals :50% of duty cycle (2 mHz to 50 kHz)
- ASK Modulation
+ Carrier : Sine, Square, Triangle, Arbitrary (except DC)
+ Modulated signals: 50% of duty cycle (2 mHz to 50 kHz)
- Điều biến PM
+ Carrier :Sine, Square, Triangle, Arbitrary (except DC)
+ Modulated signals :Sine, Square, Ramp, Triangle, Noise, Arbitrary (2 mHz-20 kHz)
+ Phase offset :0 to 360°
Other functions
- Sweep
+ Carrier : Sine, Square, Ramp, Triangle, Arbitrary (except DC)
+ Type : Linear/Logarithmic
+ Direction :Increasing or Decreasing
+ Sweep time :1 ms to 500 s
+ Trigger : Manual, External, Internal
- Burst
+ Signals : Sine, Square, Ramp, Arbitrary (except DC)
+ Type :Short (1-50,000 cycles), Infinite, Gate
+ Phase start/stop : -180° to +180°
+ Internal period : 1 μs to 500 s +/- 1%
External frequency meter
- Measurement range / resolution : 100 mHz to 200 MHz
- Sensitivity / Input impedance : 20 mVrms for 100 mHz < f < 100 MHz, 40 mVrms beyond / 1 MΩ
General Specifications
- Storage : Storage of predefined or specific signals and complete instrument configurations
- Communication interface : USB Device, USB host - GPIB, LAN option
- Mains power supply : 100~240 VACRMS 45~440 Hz CAT I - < 30W
- Software : The SX-GENE software can be downloaded free of charge from our support website, along with the LV and LW drivers
- Mechanical specifications : L x H x P = 229 mm x 105 mm x 281 mm - 2.8 kg
State at delivery: 1 GX delivered with 1 mains power lead, 1 USB cable and an Operating Manual.
