Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Testing hardness and range: Leeb hardness: 100.0 to 999.9 HLD
Testing direction: Omnidirectional (with automatic angle-correcting function)
Hardness scale conversion function* ( Conversion range varies depending on material.)
Vickers hardness: 43 to 950 HV
Brinell hardness: 20 to 655 HB
Rockwell hardness (C-scale): 19.3 to 68.2 HRC
Rockwell hardness (B-scale): 13.5 to 101.7 HRB
Shore hardness:
30.1 to 99.5 HS (ASTM)
13.2 to 98.6 HS (JIS)
Tensile strength: 390 to 1999 MPa
Sample conditions
Minimum thickness: 5 mm
Minimum mass: 5 kg
Testing position: At least 5 mm from the edge of the sample and at least 3 mm between test points
Surface roughness: Ra 2.0 or less
Functions
Automatic angle correction, offset setting, acceptance judgment, hardness scale conversion, data memory storage (1800 points), statistical calculation function, eco mode, auto power-off, backlight
Detector
Type: Detector D (standard type), impact hammer, with carbide ball at the tip
Dimensions: ø28 x 175 mm (excluding cable)
Mass Approx. 150 g
Display unit
Screen: 2.83'' (240 x 320 pixels), RGB color LCD
Dimensions: 174 x 68 x 32 mm
Mass Approx: 250 g
Power supply AC adapter, built-in battery (Ni-MH) (Up to 8 hours of operation after 100 minutes of charging)
