For full functionality of this site it is necessary to enable JavaScript.

Anritsu MS2036C 整合式矢量网络/频谱分析仪(VNA:5 kHz - 6 GHz; SPA:9 kHz - 9 GHz)

+ VNA Master MS2036C (5 kHz to 6 GHz)

  True 2-Path 2-Port Vector Network Analyzer

  Ultimate accuracy with 12-term error correction algorithm

  User-defined Quad Display for viewing all 4 S-parameters

+ Spectrum Analyzer (9 kHz to 9 GHz)

  Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS

  Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas

  Built-in pre-selector for eliminating spurious in displays

 

  The VNA Master MS2036C is a Handheld Vector Network Analyzer with frequency coverage from 5 kHz to 6 GHz PLUS a Spectrum Analyzer covering 9 kHz to 9 GHz all rolled into a single measurement powerhouse for the harsh RF and physical environments of field test. Whether it is for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, regulatory compliance, or 3G/4G and wireless data network measurements, this VNA/Spectrum Analyzer combination is the ideal instrument for making fast and reliable measurements in the field.

 

 

The Anritsu VNA Master MS2036C is the industry s highest performance, handheld solution for 2-port, 2-path measurements, anytime, anywhere. It specifically addresses complex cable and antenna measurement needs in the field with accurate, vector corrected 2-port magnitude, phase, and Distance-To-Fault measurements. The VNA Master MS2036C covers a frequency band from 5 kHz to 6 GHz, which contains a wide variety of radio frequency communications systems.

 

Equally impressive, this measurement tool offers the industry s first 12-term error correction algorithm in a handheld VNA. With a typical measurement speed of 350 µsec per point, this is ideally suited for tuning filters in the field, where multiple S-parameters often interact during tuning. Using a 3-receiver architecture, the MS2036C can measure and display all 4 S-parameters at once with with a single connection to the DUT.

 

RF engineers and technicians in the field provide installation and maintenance support for aerospace, defense, and general purpose communication systems around the world. These might typically include radars on Navy ships, communications on Army vehicles, flight-line test on Air Force and commercial jets. They support VHF Omni-directional Range (VOR) antennas in radio navigational systems globally. They will be routinely faced with a wide variety of system elements that can cause failures in the overall system: antennas, cables, filters, multiplexers, amplifiers, isolators, circulators, switches, and other sophisticated elements.

 

VNA Master also serves in new high technology applications such as radome/dielectric tests in the field. Its VNA error-correction functions vital to innovative test fixtures for dielectrics, laminates, ferrites, lossy paints, and more, offered by manufacturers such as Damaskos, Inc. Another novel application is the age-old problem of fault location in aircraft and shipboard wire cable bundles that snake through bukheads and compartments. See Application Note in Library Tab. With an ancillary module, ODTF-1, it can also do DTF on fiber optic cables.

 

+ Spectrum Analyzer (9 kHz to 9 GHz)

At the test site, the systems contain sophisticated transmitters and receivers, which require characterization of their complex transmitter and receiver (LO) signals for proper performance. These comprehensive signal tests increase the job complexity for the maintenance technician, on top of the VNA tests already needed. A field-friendly spectrum analyzer can greatly simplify this task. Spectrum analysis data are especially critical in microwave systems such as radars, defense electronics and communication systems up to 9 GHz).

 

The MS2036C VNA Master + Spectrum Analyzer adds a powerful spectrum diagnostic capability in the field to the already powerful MS2026C VNA Master! Don’t let the small footprint fool you; this combined instrument powerhouse offers performance and features that rival bench-top alternatives for simplifying spectrum monitoring, interference analysis, and other general purpose signal measurements in the field. A built-in pre-selector eliminates confusing spurious responses when doing interference test with many signals. They deliver a 30 MHz capture bandwidth, 10 MHz RBW and blazing fast sweep speeds, resulting from better data acquisition and computation.

 

These new models offer significant new features such as an internal routine which optimizes sweeps at the fastest possible speed for the most accurate data displays. The VNA Master offers broad spectrum analysis frequency coverage, impressive dynamic range, and excellent phase noise performance from 9 kHz to 9 GHz. Applications include field tests for backhaul microwave, or for measurements of the critical 5th harmonic of 3G base stations.

 

The VNA Master + Spectrum Analyzer includes many one-button standard measurement sequences, including field strength, occupied bandwidth, channel power, adjacent channel power ratio, and carrier to interference (C/I) ratio. In addition, the built-in AM/FM/SSB demodulator simplifies the task of identifying interfering signals. Overall, the VNA Master + Spectrum Analyzer is a powerful handheld tool for general purpose spectrum analysis anywhere, anytime. Option 0025, Interference Analyzer is particularly valuable for revealing co-location signal problems.

Details
Option 2 Time Domain (includes Option 0501, DTF) MS2036C-0002
Option 7 Secure Data Operation MS2036C-0007
Option 10 Built-in Variable Voltage Bias Tee MS2036C-0010
Option 15 Vector Voltmeter MS2036C-0015
Option 19 High Accuracy Power Meter (Requires USB Sensors, sold separately) MS2036C-0019
Option 25 Interference Analysis - provides a spectrogram display, signal strength with
audible tone and RSSI (received signal strength indication)
(requires external antenna)
MS2036C-0025
Option 27 Channel Scanner (requires external antenna) MS2036C-0027
Option 31 GPS Receiver (requires GPS antenna, sold separately) MS2036C-0031
Option 77 Balanced/Differential S-Parameters, 1-port MS2036C-0077
Option 501 Distance-to-Fault MS2036C-0501
Option 509 AM/FM/PM Demodulation Analyzer MS2036C-0509
Option 98 Z-540 Calibration MS2036C-0098
Option 99 Premium Calibration MS2036C-0099
  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化

注册收新闻 - 获得优惠活动的机会