Proceq Zonotip + 超声波测厚仪

Manual

Sales Flyer Zonotip

The Zonotip+ offers additional features in non destructive ultrasonic metal thickness testing. The Zonotip+ unit comes with an additional smaller 2.5 MHz single-element transducer which allows measuring in confined spaces. The measuring range of the thickness gauge on steel is from 0.7 to 300 mm.

The A-Scan mode in Zonotip+ metal thickness gauge allows excluding measurement inaccuracies, caused by e.g. flaws or cracks in the test object. The signal is visualized on the display as an A-Scan, which allows a more in-depth analysis of the reading. The A-Scan mode offers the following measurement options: 

• general flaw and crack detection
• bond quality of layered materials, including delamination detection
• thickness of layered materials

Thickness measurements where only one-sided access is possible, such as

• Pipelines
• Tanks or pressure vessels
• Erosion determination on pipes and tubes
• Remaining wall thickness of a bridge
• Polyethylen pipes

The Zonotip Ultrasonic Thickness Gauge complies with the following standards: 

• ASTM E 797
• EN 15317

Instrument
Operating temperature	-20 °C to 50 °C (-4 °F to 122 °F)
Humidity	up to 85% RH with a temperature of 25 °C (77 °F)
Battery operation period	9h
Power	built-in LiPol accumulator
Operation supply voltage	3.7 V
Dimension	157 x 70x 23 mm (6.1 x 2.7 x 0.9 inch)
Weight	250 g
Display type	TFT
Permissible surface roughness	Rz160 / N12 / Ra = 50 µm
Minimum curvature radius	10 mm (0.4 inch)
Ultrasonic velocity range	from 1000 to 9999 m/s
Data memory	100 groups each max. 500 measurements
Interface type	USB
Thickness resolution	< 99.99 mm: 0.01 mm > 100.0 mm: 0.1 mm

Transducer
Type	Dual-element	Single-element (only Zonotip+)
Frequency	4.0 MHz	2.5 MHz
Measurement range (steel)	0.7 - 300 mm	0.7 - 300 mm
Diameter of ultrasonic element	16 mm (0.6 inch)	10 mm (0.4 inch)
Connector type	LEMO type 00.250	LEMO type 00.250
Size	45 x Ø23 mm (1.8 x Ø0.9 inch)	24 x Ø16 mm (0.9 x Ø0.6 inch)
Weight	23g	16 g