Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Flow medium: Please note that DPC mass flow controllers are designed to work only with clean, non-corrosive gases. Never try to control flow rates of liquids with any DPC.
Calibrations: Performed at standard conditions [14.7 psia (101.4 kPa) and 70 °F (21.1 °C)] unless otherwise requested or stated
Environmental (per IEC 664): Installation Level II; Pollution Degree II
Flow accuracy (including linearity): ±(0.5% RD + 0.2% FS) at calibration temperature and pressure conditions after tare
Repeatability: ±0.2% of full scale
Flow temperature coefficient: 0.05% of full scale/ °C or better
Flow pressure coefficient: 0.01% of full scale/psi (6.895 kPa) or better
Typical flow response time: Default 150 ms (adjustable)
Maximum controllable flow range: 133% Full Scale
Operating range / turndown ratio: 0.5% to 100% Full Scale / 200:1
Maximum internal gas pressure (static): 50 PSIG
Maximum instantaneous differential pressure across differential sensor: 9.75 PSID
Valve type: Normally closed
Operating temperature: -10 to +60 ˚C (14 to 140 ˚F)
