Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
- Input Voltage Vin (Pins 1 and 2): 5 ±0.5VDC (2 ~ 3 kV ONLY)
- Input Voltage: 5VDC (2 ~ 3 kV ONLY)
Input Current: No load: 45mA, full load: 200mA
- Input Voltage: 24V
Input Current: No load: 35mA, full load: 160mA
- Polarity: Fixed positive or negative
- Output Voltage: 0 ~ 2500VDC
- Input Voltage: 5VDC, 15VDC, 24VDC
- Output Power: 0.5W, 0.8W, 1W
- Output Current: 0.20mA, 0.32mA, 0.40mA
- HV Setting: 10 ~ 100 K (potentiometer across Vref. and signal ground, wiper to adjust)
- Load Voltage Regulation: < 0.01% VDC of full output voltage for no load to full load
- Line Voltage Regulation: < 0.01%VDC of full output voltage over specified input voltage range
- Residual Ripple: < 0.01%V pk ~ pk at full load
- Temperature Coefficient: 100PPM/°C for the max output voltage after starting and over temperature range 0 ~ 50°C
- Output Current Monitoring:
600 ~ 1500 V: +1 V/1 kV max or -1 V/-1 kV max according to model polarity output impedance = to 200 kΩ ±1%
2 ~ 3 kV (12 ~ 24 V input only): 0 ~ +5 V±2%
2 ~ 3 kV (5 V inputs): 0 ~ +2.5 V±2%
- Reference Voltage:
12 ~ 24 V input only: 5 V ±1%, TC: 100 ppm/°C, max output current: 1 mA
5 V inputs: 2.5 V ±1%, TC: 100 ppm/°C, max output current: 1 mA
- Operating Temperature: -10 ~ +65°C, full load, max Eout, Tcase temp
- Storage Temperature: -40 ~ +70°C
- Safeguards: Arc and short-circuit protection
- Enhanced Interface (-EI) Option (2 ~ 3 kV Only):
Enable/disable (ON/OFF): 0 ~ +0.5 V enable, +2.4V to Vinput disable (default = disable)
Output current monitor (5 V input only): 0 ~ +2.5 V ±2%
Output current monitor (12 ~ 24 V input): 0 ~ +5.0 V ±2%
Construction:
Casing: Steel, tin-plated thickness 0.5 mm (0.02")
Insulation: Silicone-based RTV (contact factory for other options)
Volume: 16.4 cc (1.00 in3)
Weight: 35 g (1.23 oz)
Tolerance
- Overall: ±0.76 mm (0.030")
- Pin to Pin: ±0.38 mm (0.015")
- Pin to Tab: ±0.51 mm (0.020")
- Tab to Tab: ±0.25 mm (0.010")
