AMETEK CTS Ripple NX1000-1000-5-208 High Power Ripple Generator (1000 A / 1000 VDC, 5 kVA; 3 x 208 V)

Fully integrated ripple generator, 1000 A / 1000 VDC, 5 kVA amplifier, measurement and control unit, 3 x 208 V mains input, incl. connection box CBP-1000-1000-2-3m

Ripple Source NX5

Frequency: DC; 10 Hz – 300 kHz

Power: 5 kVA

Output AC (source mode): Dual range

High range: 160 Vp ± 5% / 65 Ap ± 5% (45 Vp ± 5% @ 300 kHz)

Low range: 80 Vp ± 5% / 130 Ap ± 5% (22 Vp ± 5% @ 300 kHz)

Output DC (source mode):

High range: ± 160 Vp ± 5%/ ± 28 A ± 5%

Low range: ± 80 Vp ± 5% / ± 56 A ± 5%

Mains supply: 50 - 60 Hz; 208: 3 x 208 V ± 10 % / 39 A (63 A CEE)

Dimensions: built into 19" rack on wheels, 860 x 552 x 1812 mm / 33.6 x 21.7 x 71.3"

Weight: approx. 250 kg

Heat dissipation: approx. 1.6 kW

RippleCoupler NX1000-1000

Outputs: 2

EUT supply: 1000 ADC / 1000 VDC

EUT connection: at connection box (included) with 3 m cables (other lengths on request)

Ripple output (at EUT terminals):

10 Hz - 300 kHz

max. 80 Vp ± 5% (open, 2:1)

max. 504 Ap ± 5% (short, 4:1)

Transformer ratio: 2:1 and 4:1, switchable (automatic switching)

Capacitor bank: inlcuded 10mF, low ESR, automatic active pre-charge and discharge circuit, additional passive discharge circuit

Mains supply: 1kW, 230 V / 4 A or 110 V / 9 A

Dimensions: built into 19" rack on wheels, 800 x 552 x 1812 mm / 31.5 x 21.7 x 71.3"

Weight: 560 kg / 1234 lb

Heat dissipation at max. EUT current: max. 1.2 kW

Environmental conditions:

5°C - 35°C, humidity 10% - 90% non-condensing, 86 kPa (860 mbar) to 106 kPa (1 060 mbar), altitude < 2000 m

Indoor use only, overvoltage category II, IP 20, pollution degree 2

Sound level: below 80 dBA

Footnotes: derated voltage and current performance < 300 Hz and > 50kHz

Datasheet