Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Channels: 4
Internal Rate Generator:
Rate (T0 period): 0.001 Hz to 20.000 MHz (1000 s – 50 ns)
Resolution: 5 ns
Accuracy: 5 ns + (0.0001 x period)
T0 Period Jitter: < 50 ps RMS
Time Base: 200 MHz, low jitter PLL
Oscillator: 50 MHz, 50 ppm crystal oscillator
System Output Modes: Single, Normal, Burst, Duty Cycle, External Gate/Trigger
Burst Mode: 1 to 10,000,000 pulses
Duty Cycle Mode: 1 to 10,000,000 pulses ON and/or OFF
Pulse Control Modes: Internally triggered, externally triggered or external gate.
Timing Generator:
Pulse Width Range: 10 ns -1000 s
Width Accuracy: 1 ns + 0.0001 x width setting
Width Resolution: 250 ps
Pulse Delay Range: 0 – 1000s
Delay Accuracy: 1 ns + 0.0001 x delay setting
Delay Resolution: 250 ps
Jitter (channel to channel): < 50ps RMS
Output Multiplexer: Any/all channels may be OR’d to any/all outputs
Time Base: Same as the internal rate generator
Channel Output Modes: Single, Normal, Burst, Duty Cycle
Burst Mode: 1 to 10,000,000 pulses
Duty Cycle Mode: 1 to 10,000,000 pulses ON and/or OFF
Wait Counts: 1 to 10,000,000 pulses
Channel Control Modes: Internally triggered or external gated. Each channel may be independently set to either mode.
Output Module (AT20):
TTL/CMOS Mode:
Output/Source Impedance: High Impedance
Output Level: 4.0 V (typical) into 1 kΩ
Rise Time (10% – 90%): < 3ns (1.5ns typical)
Jitter: < 50 ps RMS channel to channel
Adjustable Mode:
Output Level: 2 V to 20 VDC into 1 kΩ or 1 V to 10 VDC into 50 Ω
Amplitude Resolution: 10 mV
Current: 200 mA typical, 400 mA (short pulses)
Rise Time (10% – 90%): 15 ns (typical) @ 20V into Hi-Z (25 ns typ @ 10V into 50 Ω)
Slew Rate: 0.1V/ns
Overshoot: < 1 V + 10% of pulse amplitude
Input Module (IA15):
Trigger Input:
Function: Generate individual pulses, start a burst or continuous stream
Rate: DC to 1/ (200 ns + longest active pulse). Maximum of 5 MHz
Slope: Rising or Falling
Threshold: 200 mV to 15 VDC
Maximum Input: 60 V Peak
Resolution: 10 mV
Trigger Accuracy: ±3% of Threshold Voltage
Impedance: 1.2K ohm
Trigger Jitter: < 800 ps RMS
Insertion Delay: < 110 ns
Minimum Pulse Width: 20 ns
Pulse Inhibit Delay: < 150 ns RMS
Output Inhibit Delay: < 100 ns RMS
Gate Input:
Mode: Pulse Inhibit or Output Inhibit
Polarity: Active High or Active Low
Memory and Connectivity:
Memory Storage: 16 Memory Location
USB: USB 1.0 Standard
RS-232: DE-9F Connector using RS-232 Communications Standard
External Clock In: 10 MHz – 100 MHz user selectable in discrete values
External Clock Out: To or Ref out (10 to 100 MHz) user selectable in discrete values
Physical and Environmental:
External Clock Out: 10.5” x 8.25” x 5.5” [267 x 210 x 140mm]
Weight: 8 lbs [3.6 kg]
Power: 100 – 240 VAC 50/60 Hz <3 A
Fuse: 3.15 A, 250 V Time-lag (Qty 2)
Operating Temp: 32 – 104°F [0 – 40°C]
Transportation & Storage Temp: -40 – 158°F [-40 – 70°C]