CEM DT-9230 Electrical Testers (LED 12V~600V AC/DC) | EMIN.ASIA

CEM DT-9230 Electrical Testers (LED 12V~600V AC/DC)

Name: CEM DT-9230 Electrical Testers (LED 12V~600V AC/DC)
Brand: CEM

ManufacturerCEM

ModelDT-9230

OriginChina

Warranty12 months

Contact

Quantity

Secure Checkout

Quality Engagement

Easy change and return

Delivery Available

LEDs

Voltage range: 12 V to 600 V ac/dc

Resolution: ±12V,24V,50V,120V,230V,400V,600V

Frequency range: 0/40Hz to 400 Hz

Response time: ≤0.5 seconds

Auto power on: ≥12V ac/dc

Internal basic load impedance Peak current: Maximum 3.5mA at 1000 V 200 kΩ/1s<3.5mA(no RCD tripping)

Operation time: Duration Time = 30 seconds

Recovery time: Recovery Time =240 seconds

Switchable Load: ﹣7 kΩ

Peak current: Is(load) = 150mA

RCD triping: I = 30mA at 230V

Continuity Test: 0 to 400kΩ

Accuracy: nominal resistance ﹢50%

Test current: ≤5 μ A

Size (HxWxD): 240mm x 78mm x 30mm

Weight: 237g

Accessories:

Two “AAA” batteries, gift box with carrying case.

Datasheet

Features
	9230	9231	9232	9233
Complies with EN 61243-3:2014		*	*	*
LED Indication Range: 12 V to 600 V dc and ac	*			*
LED Indication Range: 12 V to 1000 V dc and ac		*	*	*
Independent ELV indicator LED, indicates if >50 V ac/120 V dc is present even in the event of no battery power or main circuit failure	*	*	*	*
LCD Indication Range: 6 V to 1000 V dc and ac			*	*
Resistance Measurement: LCD 3½ digit (0 to 1999 Ω/1Ω resolution)			*	*
LCD Backlight Display HOLD: Freeze/unfreeze display with voltage or resistance measurement			*	*
Fixed Impedance ~200 kΩ (≤3.5 mA @ 1000 V)		*	*	*
Switchable Load by 2 pushbuttons (30 mA @ 230 V)		*	*	*
Vibration During Load (when 2 switchable load pushbuttons are pushed)		*	*	*
Single-Pole Phase Test (also operates with gloves)		*	*	*
Rotary Field Direction (also operates with gloves)		*	*	*
Continuity Test / Diode Test		*	*	*
Fashlight		*	*	*
Beeper for Continuity/Phase/ACV	*	*	*	*
19 mm Probe Tip distance when docked	*	*	*	*
CAT III 1000 V / CAT IV 600 V	*	*	*	*
IP64		*	*	*