Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
The MULTIWELD FV 220M is a single-phase welding machine, combining MIG/MAG, cored wire and MMA welding processes. It operates on a supply voltage between 85 and 265 V thanks to its FV (Flexible Voltage) power supply. Its intuitive interface integrates two digital displays offering simple and accurate settings. Fitted with an accurate and powerful 4 drive roll feeding system, offering welding quality even on aluminium.
MULTIPROCESS:
MIG/MAG welding :
- steel wire: Ø 0.6 to 1.0 mm
- stainless steel wire: Ø 0.8 to 1.0 mm
- aluminium wire: Ø 0.8 and 1.0 mm
- cored wire (reverse polarity): Ø 0.9 to 1.2 mm
MMA welding: basic and rutile electrodes (up to Ø 5 mm).
OPTIMISED MIG/MAG SETTING:
- Choice of the trigger mode: 2T or 4T.
- Welding guide: tables assist the user to adjust and fine tune the voltage and the diameter of the filler wire according to the thickness of material being welded.
INTUITIVE
- Display readable even in bright light.
- Simple user interface with ergonomic controls allowing gloved use.
INTEGRATED WIRE FEEDER
- Compatible with reels : Ø 200 / 300 mm
- Wire feeder with 4 rollers for an efficient wire feeding.
- EURO torch connector for quick assembly/disassembly.
PRE-HEATING, PURE CO2
- Pre-installed socket (36 V - 4.2 A) for gas heater in pure CO2 welding (heater not included).
- Compatible with US (type A) and EURO electrical sockets (type C/E/F).
ROBUST
- IP 23 classification for outside use.
- Accepts very long extension cords (100 m).
- Reinforced wheels for better stability and easier transportation.
- Support for gas cylinder up to 4 m³ (20L).
- Protected against overvoltage up to 400 V (PROTEC 400)
Specifications:
Power supply: 230 V, 1 ph, 50/60 Hz
Fuse: 16 A
Normal current output (MIG/MAG): 30-220 A
Normal current output (MMA): 30-200 A
Duty cycle (environment temp. at 40°C):
- MIG/MAG:
Imax 220 A @ 20%
@ 60%: 160 A / 22 V
@ 100%: 120 A / 20 V
- MMA:
Imax 200 A @ 20%
@ 60%: 140 A / 25.6 V
@ 100%: 100 A / 24 V
Motor speed: 2 - 15 m/min, 4 rollers (2 motor)
Supported wire reels: Ø200-300 mm
Wire diameter:
+ Steel: 0.6 - 1 mm
+ Inox: 0.8 - 1 mm
+ Aluminum: 0.8 - 1 mm
+ Cored wire: 0.9 - 1.2 mm
No-load voltage: 75 V
Protection level: IP 23
Dimensions (L x w x h): 77 x 79 x 47
Weight: 32 kg
Standard: IEC 60974-1/5/10 A
Original equipment (roller): 0.8/1.0 - A (steel, inox)
Included accessories: Torch TOPARC MIG 250A - 3 m + Electrode holder 2 m + Earth cable 2.5 m
