Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Galvanic Sensor
Smart probe, RS485 communication port
Cable length (m): 10
Measuring Range
0.0 to 500.0 % saturation
0.00 to 50.00 mg/L (ppm)
Resolution
0.01 mg/L (ppm)
0.1 % saturation
Accuracy
0.00 to 20.00 mg/L (ppm): ±2% of reading or ±0.2 mg/L (ppm), whichever is greater
20.00 to 50.00 mg/L (ppm): ±6% of reading
0.0 to 200.0% saturation: ±2% of reading or ±2.0%, whichever is greater
200.0 to 500.0% saturation: ±6% of reading
Calibration
1 or 2 points: at 100% and/or 0% saturation, or 8.26 mg/L and/or 0 mg/L in air-saturated water or zero oxygen solution
User-defined calibration point: by entering saturation % or mg/L value
Temperature Measurement
Range: -5.0 to 50.0°C (32.0 to 122.0°F)
Resolution: 0.1°C; 0.1°F
Accuracy: ±0.5°C / ±1.0°F
Temperature Compensation: Automatic
Temperature Calibration: Single-point offset
Compensation Parameters
Power source:
Automatic (from the probe)
Manual
Pressure compensation: Automatic, 420 to 850 mmHg
Salinity compensation: Automatic, 0 to 70 g/L (manual setting)
Material and Mechanical Specs
Sensor body material: PVDF
Sensor type: Galvanic cell
Cathode: Silver (Ag)
Anode: Zinc (Zn)
Diameter: 17 mm
Length: 30 mm
Maximum pressure: 3 bar
Threaded connection: 3/4" NPT at 25°C
Membrane cap material: PEI and PTFE
O-ring: Nitrile rubber (NPR)
Protection rating: IP68
