Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
Temperature: 5-45°C
Pressure: 1.0-4.0 Kgf/cm²
Flow Procedure**: PF+AC+RO+DI
Ion rejection rate: 96%-99%
Organic rejection rate: >99% (when MW>200 Dalton)
Particles and bacteria rejection rate: >99%
Bacteria: <0.1 cfu/ml
Output(25°C)****: 15 L/hrs
Pure water outlet: RO and deionized water
Water Quality Monitor: Portable TDS/conductivity test pen + on-line resistivity monitor
DimensionLxWxH: 410×220×420 mm
Weight: 20 kg
Standard configuration: Main body (Including 1 set of cartridges) + 15 liters tank+ TDS pen +accessory bag
Power Consumption (W): 48 W
Power Supply: AC110-220 V, 50/60 Hz
Note: *The feed water quality will influence the pure water´s quality and cartridges´ life-span.
**PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange, UV:ultraviolet, TF:terminal microfiltration.
***All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.
Resistivity: >15-18.2 MΩ.cm
Conductivity: 0.055-0.067µs/cm
Particle(>0.2µm): -
Flow rate: 2.0 L/min
