Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Volume: 256 liters
Interior dimensions: 640W x 800H x 500D mm
Exterior dimensions: 824W x 1552H x 685D mm
Stainless steel grid: 2
Max. number of grids: 9
Max. loading per grids: 20 kg
Max. loading of chamber: 200 kg
Working temperature range with humidity and/or light: 10 to 60°C
Working temperature range with humidity: 0 – 60°C
Setting temperature range: 0 to 60°C
Setting accuracy: 0.1°C
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Setting range humidity: 10 – 80% rh
Setting accuracy: 0.5% rh
Humidity supply with distilled water from external tank by self-priming pump
Humidification by hot steam generator
Active humidifying and de-humidifying adjustable from 10-80 % rh with digital display of relative humidity - resolution of display 0.1 %, setting accuracy 0.5 %
Daylight and UV-light can be programmed individually via controller
Illumination unit consisting of 4 fluorescent lights with cold white light (standard illuminant D65, 6500K) and 2 UV-lamps in the spectral range of 320 - 400 nm
ControlCOCKPIT:TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function setpointWAIT: the process time does not start until the set temperature is reached
Adjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT
Adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, light, programme time, time zones
Fan: forced air circulation in working chamber adjustable from 10 to 100 % in 10 % steps
Documentation: programme stored in case of power failure
Programming: AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Safety
+ Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
+ Temperature control: over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
+ AutoSAFETY: additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
+ Autodiagnostic system: integral fault diagnostics for temperature and humidity control
+ Alarm: visual and acoustic
Cooling: Cooling compressor with climate-neutral refrigerant CO2 (R744), GWP1
Air jacket heating system for gentle all-around heating
No drying-up of the load caused by the cooling device due to separation of thermal jacket from interior
Highly efficient automatic defrosting system
Door: inner glass doors
Doors: outside stainless steel, fully insulated
Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel
Stainless steel interior
Installation: on lockable castors
HeatBALANCE function for application specific adjustment of heat output distribution (balance) between the upper and lower heating groups in an adjustment range between -50 % and +50 %
ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function
Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)
Internal data logger with a storage capacity of at least 10 years
Ambient temperature: 15°C to 28°C (up to 34°C with limited temperature range)
Humidity: max. 70% rh, non-condensing
Altitude of installation: max. 2000 m above sea level
Voltage: 230 V, 50 Hz
Electrical load: 1450 W
Accessories:
+ Calibration certificate: standard values 10°C and 37°C, 60% rh at 30°C (Memmert supply)
+ 2 stainless steel grids
+ Water tank including connection hose
+ Manual
