Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
- Volume: 749 liters
- Interrior dimensions: width 1040 x height 1200 x depth 850 mm
- Exterior dimensions: width 1224 x height 1726 x depth 1035 mm
- Stainless steel grids (standard): 1
- Max. number of grids/shelves: 14
- Working temperature range: at least 10 above ambient temperature to 3000C
- Setting accuracy: up to 99.90C; 0.10C, from 1000C; 0.50C
- German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT
- ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
- Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
- Function setpointWAIT: the process time dose not start until the set temperature is reached
- Calibration: three freely selectable temperature values
- Adjustable parameters: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones
- Forced air circulation by 2 quiet air turbines, adjustable in 10 % steps
- Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10% steps
- Programme stored in case of power failure
- Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
- Autodiagnostic system: for fault analysis
- Interface: Ethernet
- Door: fully insulated stainless steel door with 2-point locking, two leaves
- Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel
- Internal data logger with a storage capacity of at least 10 years
- 100% AtmoSAFE
- Voltage: 400 V, 50/60 Hz
- Electrical load: approx. 7000 W
- Ambient temperature: 5 – 400C
- Humidity: max. 80% rh, non-condensing
Accessories:
+ Works calibration certificate at 1600C (Memmert supply)
+ Stainless steel grid, 1 pc
+ Manual
