Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Specifications
Frequency Response: 100Hz-30MHz
DC Bias Current Max.: 20A
Power consumption: 320W Max.
Accuracy (6632):
0.000A-1.000A 1%+5mA
1.001A-5.000A 2%
5.001A-20.000A 3%
DCR Test: Yes
Constant power output: Yes
Current switch: /
Graphic Scanning Analysis:
+ Frequency graphic scanning analysis
+ Magnetic saturation curve (Isat)
+ Rated current curve (Irms)
6632 Impedance Analyzer:
Frequency: 10Hz-50MHz
Frequency Setting: Continuity
Frequency Resolution: 100mHz, 6-bit Frequency Input
Frequency Output Accuracy: ±0.01%
Basic Accuracy: ±0.08% (typical ±0.05%)
AC Drive Level:
+ Test Signal Voltage Level: 10mV - 2Vrms(100Ω); 10mV - 1Vrms(25Ω)
+ Voltage Minimum Resolution: 1mV
+ Accuracy: ALC ON：6％ * Voltage ±2mV; ALC OFF：10％ * Voltage ±2mV
+ Test Signal Current Level: 200µA - 20mArms
+ Current Minimum Resolution: 10µA
+ Accuracy: ALC ON：6％ * Current ± 20µA; ALC OFF：10％ * Current ± 20µA
DC Drive Level: 1V (fixed)
Output Impedance: 25Ω/100Ω (switchable)
DC Bias Voltage:
+ Built-in ±12V: (100Hz-50MHz)
+ External Voltage Bias: (±12V/±40V/±600V/±2000V)
DC Bias Current:
+ Option DC Bias Current Source: (20A/60A/120A/320A)
+ External Voltage Bias: (100mA)
Measurement Mode: Meter mode, list mode, sweep mode, and optional equivalent circuit analysis function (S model)
Measurement Parameters: |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 ESR、εr 、μr
Test Time (Fastest): < 3mS
6632 Measurement Parameters
|Z|0.000 mΩ to 9999.99 MΩ
R, X± 0.000 mΩ to 9999.99 MΩ
|Y|0.00000 μS to 999.999 kS
G, B± 0.00000 μS to 999.999 kS
θRAD± 0.00000 to 3.14159
θDEG± 0.000° to 180.000°
Cs, Cp± 0.00000 pF to 9999.99 F
Ls, Lp± 0.00 nH to 9999.99 kH
D0.00000 to 9999.99
Q0.00 to 9999.99
Δ± 0.00% to 9999.99%
Rdc0.00 mΩ to 99.9999 MΩ
εr' εr''0 to 100000
μr' μr''0 to 100000
System
Measurement Circuit: Series/Parallel
Correction: Open Circuit/Short Circuit/Load correction
Cable Compensation: 0 / 0.5 / 1 /2 (m)
BIN: ABS、ΔABS、Δ%、OFF
Comparator: 9
List Mode: 50 groups of Multi-steps setting (Each group contains up to 15 steps)
Bulit-in Storge: 100 sets LCR setting documents, 50 groups of list mode setting
USB Host Storge: LCR setting documents, list mode setting document, BMP graphics, Sweep screen and test result data
Trigger Test: Auto, manual, RS-232, GPIB, Handler
Power Supply: Voltage：88-264Vac; Frequency：47-63Hz
Power consumption: 30VA
Environment: Temperature：10℃-40℃; Humidity：20-90%RH
Dimension:
356x147x497 mm (W*H*D) /6225
336x147x340 mm (W*H*D)/ 6632
Weight:
15 Kg (6225)
3.95 Kg (6632)
Display: Color Screen, 7" TFT (800*480)/ 6632
Interface: RS-232、Handler
