Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Power: 3PH 380V，50HZ,
Suitable system: LiFePO, lithium cobalt oxide,Lithium manganese oxide system and coating process of battery anode and cathode
Operating material thickness
Al foil: 10~30um
Cu foil: 7~30um
The design of the roll surface width: 300mm
Guaranteed coating width: 50~280mm
Mechanical running speed of equipment: 7m/min
Coating speed: 1-7m/min（Depending on the drying condition）
Suitable for slurry viscosity: 2000~16000 Cps
Single coating thickness range:50-150μm
Minimum interval length: 5mm
Multi section minimum coating length: 20mm
Solvent properties
Oiliness solvent NMP(s.g=1.033,b.p=204℃)
Water solvent H2O/NMP(s.g=1.000,b.p=100℃)
Suitable solid content
Anode S.C. 60% ± 20%
Cathode S.C. 60% ± 20% (PVDF system)
S.C. 50% ± 5% (SBR system)
Specific gravity
Anode: 1.5—2.59/cm2
Cathode: 1~1.89/cm2
Coating method:Double sides 3 sections, unequal intermittent transfer coating / second sides automatic tracking / continuous transfer coating
Base material running direction: Forward coating ,The base material empty foil movement Positive, reverse.
Control pressure: 0 ~ 50N
Rectify deviation: EPC control，stroke 80mm
Oven length: 12m
Material quality: SUS304 stainless steel,Inner tank 1.0mm,outside tank 1.2mm
Transfer interval coating machine,the coating thickness is easy to adjust,more accuracy,easy to operate.it can do both continuous coating and interval coating.
