Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Versions: Broadband: For broadband measurements using the following probes: WPFx, WPT, WP50, WPH60 and WPH1000.
Field probes: Automatic detection and recognition
Broadband: 0 Hz – 60 GHz (depending on field probe)
Spectrum analysis: up to 10 MHz
Weighted Peak Method: 1 Hz – 10 MHz (real-time WPM for direct comparison with limits)
Readout values: Total field (instantaneous, max., min. and average)
Field components (X, Y, Z)
E-field units: V/m, kV/m, μW/cm², mW/cm², W/m², %
H-field units: nT, μT, mT, T, A/m, %, mG, G
Log time: Configurable (from 0.5 s to 6 min)
Average modes: Fixed or sliding, according to international standards
Average intervals: 10 s, 15 s, 30 s, 1 min, 2 min, 5 min, 6 min, 10 min, 15 min, 30 min
Schedule measurement: Customized (up to 24 hours)
Memory capacity: More than 1 million samples
Data downloading: USB-C and fibre optics
Firmware updating: USB-C
Alarm: 2400 Hz audible signal (adjustable threshold)
Display type: Color transmissive TFT (480 × 272 pixels)
GPS (optional): Built-in u-blox 8 (56 independent tracking channels)
Digital output: Probe direct output / Digital output via USB-C for WP400 family probes
Battery: Internal rechargeable Li-ion
Autonomy: > 24 hours
Temperature range: -10 ºC to +50 ºC
Humidity: 5% to 95%, non-condensing
Size: 100 × 215 × 40 mm (3.9 × 8.4 × 1.5 in.)
Weight: Broadband: 560 g (19.7 oz)
