Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Voltage: 80V
Current: 120A
Power: 3kW
Size: 2U
Input
Number of phases: 3-phase 3-wire +PE
Voltage: 340~460VAC
Frequency: 45-65Hz
Display mode: 4.3- inch color LCD
Voltage resolution: 0.01V/0.001V
Current resolution: 0.01A/0.001A
Power resolution: 0.001kW/0.0001kW
Setting voltage/current accuracy: ≤0.1%Umax; ≤0.2%Imax
Measurement voltage/current accuracy: ≤0.1%Umax; ≤0.2%Imax
Load effect Voltage/Current: ≤0.05%Umax; ≤0.15%Imax
Source Effect Voltage/Current: ≤0.02%Umax; ≤0.05%Imax
Load Response Time: ≤2mS
10%-90% Rise Time: 30mS
Temperature Drift (Voltage/current): 0.05% Set Value
Noise: ≤65dB（A）
Overvoltage protection: 0~110%Umax adjustable
Maximum lead pressure drop compensation: 30V(1500V power supply)
Output discharge time: Less than 1S(when equipped with energy absorption unit)
Digital communication interface: Standard port:CAN, RS485/232+LAN Remote port:① USB,RS485+ analog ②USB, RS232+ analog ③USB, LAN+ analog ④USB, CAN+ analog
Analog programming interface: Start, stop, alarm, 0-5V or 0-10V analog control output
Protection and alarm: Module fault alarm (including input voltage abnormality protection, DC bus voltage abnormality protection, internal overcurrent protection, short circuit protection, etc.), output overvoltage alarm (software + hardware), overcurrent protection, internal overheating alarm, output wire compensation fault alarm
Cooling method: temperature controlled forced air cooling
Parallel operation: Support a maximum of 10 parallel nodes in master/slave mode
Efficiency: ~95%
Operating temperature: 0~ 40℃
Storage temperature: -20~70℃
Humidity: <80%, no condensation
