OMEGA CNITH-I3252-2-C24 1/32, 1/16, and 1/8 DIN Humidity and Temperature Controllers (Dual 4 Digit LED, RS232, RS485, 1/32 DIN)

Input Type: Digital

Form factor: 1/32 DIN

Samples,Max: 2/sec

Display Size: 10.2 mm (0.40 in)

Display Type: Dual 4 Digit LED

Probe Length: 51 mm

Ramp and Soak: Single Ramp & Soak

A/D Conversion: A/D Conversion: 12-bit RH and 14-bit temp Reading,Rate: 2 samples per sec max,Digital Filter: Programmable Decimal Selection: None, 0.1 for temperature and humidity

Control Action: Action: Reverse (heat) or direct (cool)

Control Output: 2 Analog Output

Data Interface: RS232, RS485

Supply Voltage: 90 to 240 Vac

Measurement Type: Temperature, Humidity

Number of Inputs: 2

Display Type Note: Display: 4-digit, 9-segment LED i32, i16D, i8DV: 10.2 mm (0.40") i8: 21 mm (0.83") i8DH: 10.2 mm (0.40") and 21 mm (0.83") RED, GREEN and AMBER programmable colors for process variable, setpoint and temp units

Enclosure Ratings: IP65, NEMA Type 4X

Number of Outputs: 2

Relative Humidity: 90% RH non-condensing

Supply Power Note: Standard power input: 90 to 240 Vac ±10%, 50 to 400 Hz, 110 to 300 Vdc, equivalent voltage (*no entry required)

Supply Power Type: AC

Data Interface Note: RS232/RS422/RS485: Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 K baud; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status RS485: Addressable from 0 to 199

Additional Features 1: 2 inch Probe

Probe Dimensions Note: 51 mm (2") probe for iTH with 1 m (3') cable

Operating Temperature, Max: 50 °C

Operating Temperature, Min: 0 °C